1. Z. Wei, Y. Li, Z. Li, S. Song and B. Li, 3-D reconstruction algorithm of flame based on inversion calculation of thermal radiation, IEEE Transactions on Instrumentation and Measurement, vol. 65, no.12, pp. 2808–2815, 2016.
2. J. Sun and Y. Yan, Characterisation of flow intermittency and coherent structures in a gas–solid circulating fluidised bed through electrostatic sensing, Industrial & Engineering Chemistry Research, vol. 55, no. 46, pp. 12133–12148, 2016.
3. Y. Yan, X. Cui, M. Guo and X. Han, Localization of a continuous CO2 leak from an isotropic flat–surface structure using acoustic emission detection and near-field beamforming techniques, Measurement Science and Technology, vol. 27, no. 11, pp. 5105–5113, 2016.
4. S. Zhang, Y. Yan, X. Qian and Y. Hu, Mathematical modelling and experimental evaluation of electrostatic sensor arrays for the flow measurement of fine particles in a square-shaped pipe, IEEE Sensors Journal, vol. 16, no. 23, pp. 8531–8541, 2016.
5. J. Sun and Y. Yan, Non-intrusive measurement and hydrodynamics characterization of gas–solid fluidized beds: a review, Measurement Science and Technology, vol. 27, no. 11, pp. 112001–112031, 2016.
6. Y. Hu, Y. Yan, L. Wang and X. Qian, Non-contact vibration monitoring of power transmission belts through electrostatic sensing, IEEE Sensors Journal, vol. 16, no. 10, 3541–3550, 2016.
7. J. R. Coombes and Y. Yan, Measurement of velocity and concentration profiles of pneumatically conveyed particles using an electrostatic sensor array, IEEE Transactions on Instrumentation and Measurement, vol. 65, no.5, pp. 1139–1148, 2016.
8. Y. Hu, Y. Yan, L. Wang, X. Qian and X. Wang, Simultaneous measurement of belt speed and vibration through electrostatic sensing and data fusion, IEEE Transactions on Instrumentation and Measurement, vol. 65, no. 5, 1130–1138, 2016.
9. W. Zhang, Y. Yan, Y. Yang and J. Wang, Measurement of flow characteristics in a bubbling fluidized bed using electrostatic sensor arrays, IEEE Transactions on Instrumentation and Measurement, vol. 65, no. 3, pp. 703–712, 2016.
10. N. Li, G. Lu, X. Li and Y. Yan, Prediction of NOx emissions from a biomass fired combustion process based on flame radical imaging and deep learning techniques, Combustion Science and Technology, vol. 188, no. 2, pp. 233–246, 2016.
11. Y. Yang, Z. Huang, W. Zhang, J. Wang, M. Lungu, Z. Liao, F. Wang, Y. Yang, Y. Yan and J. Yang, Effects of agglomerates on electrostatic behaviors in gas–solid fluidized beds, Powder Technology, vol. 287, 139–151, 2016.
12. J. Zhang, W. Zhang, Y. He and Y. Yan, Predicting the amount of coke deposition on catalyst pellets through image analysis and soft computing, Measurement Science and Technology, vol. 27, no. 11, pp. 4006–4017, 2016.
13. X. Cui, Y. Yan, Y. Ma, L. Ma and X. Han, Localization of CO2 leakage from transportation pipelines through low frequency acoustic emission detection, Sensors and Actuators A: Physical, vol. 237, no. 4, pp. 107–118, 2016.
14. X. Cui, Y. Yan, M. Guo, X. Han and Y. Hu, Localization of CO2 leakage from a circular hole on a flat–surface structure using a circular acoustic emission sensor array, Sensors, vol. 16, pp. 1951–1964, 2016.
15. X. Han, H. Zhang, X. Yu, L. Wang and J. Yan, Economic evaluation of grid-connected micro-grid system with photovoltaic and energy storage under different investment and financing models, Applied Energy, vol. 184, pp. 103–118, 2016.
16. 崔希望, 闫勇, 郭淼, 韩晓娟. 基于声发射的CO2运输设备泄漏检测和定位研究[J]. 仪表技术与传感器, 2016(12):136-140.
17. 张文彪, 杨彬彬, 钱相臣, 闫勇. 网状静电传感器弯管处颗粒速度与浓度的测量[J]. 仪器仪表学报, 2016(12):2790-2796.
18. 张立峰，王化祥，一种修正的电阻层析成像Landweber迭代算法，计量学报，2016，37(3): 271-274.
19. 李楠, 卢钢, 李新利, 闫勇. 基于集成深度玻尔兹曼机和最小二乘支持向量回归的燃烧过程NOx预测算法[J]. 动力工程学报, 2016, 36(8):615-620.
20. 李新利, 李楠, 孙愉佳, 卢钢, 闫勇, 刘石. 火焰自由基成像和极限学习机在 NOx 排放预测中的研究[J]. 系统仿真学报, 2016, 28(5):1179-1185.